QQ登录

只需一步,快速开始

扫一扫,访问微社区

登录 | 注册 | 找回密码

电磁兼容小小家

 找回密码
 注册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

IEC 61000-3-2:2018 Limits - Limits for harmonic current emissions

2018-1-27 09:25| 发布者: amo| 查看: 1966| 评论: 0

摘要: AbstractNEW!IEC 61000-3-2:2018 is available asIEC 61000-3-2:2018 RLVwhich contains the International Standard and its Redline version, showing all changes of the technical content compared to the prev ...

Abstract

NEW!IEC 61000-3-2:2018 is available as IEC 61000-3-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61000-3-2:2018 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which can be produced by equipment tested under specified conditions. It is applicable to electrical and electronic equipment having a rated input current up to and including 16 A per phase, and intended to be connected to public low‑voltage distribution systems. Arc welding equipment which is not professional equipment, with a rated input current up to and including 16 A per phase, is included in this document. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this document and can be subject to installation restrictions as indicated in IEC 61000-3-12. The tests according to this document are type tests. For systems with nominal voltages less than but not equal to 220 V (line-to-neutral), the limits have not yet been considered.
This fifth edition cancels and replaces the fourth edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a)   an update of the emission limits for lighting equipment with a rated power ≤ 25 W to take into account new types of lighting equipment;
b)   the addition of a threshold of 5 W under which no emission limits apply to all lighting equipment;
c)   the modification of the requirements applying to the dimmers when operating non‑incandescent lamps;
d)   the addition of test conditions for digital load side transmission control devices;
e)   the removal of the use of reference lamps and reference ballasts for the tests of lighting equipment;
f)    the simplification and clarification of the terminology used for lighting equipment;
g)   the classification of professional luminaires for stage lighting and studios under Class A;
h)   a clarification about the classification of emergency lighting equipment;
i)    a clarification for lighting equipment including one control module with an active input power ≤ 2 W;
j)    an update of the test conditions for television receivers;
k)   an update of the test conditions for induction hobs, taking also into account the other types of cooking appliances;
l)    for consistency with IEC 61000-3-12, a change of the scope of IEC 61000-3-2 from equipment with an input current ≤ 16 A to equipment with a rated input current ≤ 16 A.

鲜花

握手

雷人

路过

鸡蛋

最新评论

热门阅读
pcb电路板设计的经典法则=黄金法则
1选择正确的网格-设置并始终使用能够匹配最多元件的网格间距。虽然多重网格看似效用显着,但工 ......
发布:2018-11-15     阅读:2066      点评:3
普及:二噁英的来源与危害
二噁英是什么? 二噁英实际上是二噁英类的简称,是一种无色无味、毒性严重的脂溶性物质,包 ......
发布:2019-09-05     阅读:73      点评:0
IEC60601-1-2-3ED-2007
RT,之前看到有人分享,但点开帖子什么都没有,就又找了份传上来了 ......
发布:2012-10-18     阅读:1966      点评:9

QQ|小黑屋|电磁兼容网 电磁兼容小小家 EMC工程师家园 电磁兼容(EMC)小小家学习园地

GMT+8, 2019-9-22 22:40 , Processed in 0.071359 second(s), 24 queries .

返回顶部