电磁兼容小小家

 找回密码
 注册

New Restriction Substance of REACH - Inorganic ammonium

2016-7-31 17:17| 发布者: amo| 查看: 203| 评论: 0

摘要: On 24 June 2016, European Commission published amendment Regulation 2016/1017 oninorganic ammonium salts, as new entry 65 of annex XVII of REACH.In Annex XVII to Regulation (EC) No 1907/2006, the new ...

On 24 June 2016, European Commission published amendment Regulation 2016/1017 on inorganic ammonium salts, as new entry 65 of annex XVII of REACH.

 

In Annex XVII to Regulation (EC) No 1907/2006, the new entry 65 is added as below:

1、Shall not be placed on the market, or used, in cellulose insulation mixtures or cellulose insulation articles after 14 July 2018 unless the emission of ammonia from those mixtures or articles results in a concentration of less than 3 ppm by volume (2,12 mg/m3) under the test conditions specified in paragraph 4.

 

A supplier of a cellulose insulation mixture containing inorganic ammonium salts shall inform the recipient or consumer of the maximum permissible loading rate of the cellulose insulation mixture, expressed in thickness and density.

 

A downstream user of a cellulose insulation mixture containing inorganic ammonium salts shall ensure that the maximum permissible loading rate communicated by the supplier is not exceeded.

2、By way of derogation, paragraph 1 shall not apply to placing on the market of cellulose insulation mixtures intended to be used solely for the production of cellulose insulation articles, or to the use of those mixtures in the production of cellulose insulation articles.

 

3、In the case of a Member State that, on 14 July 2016, has national provisional measures in place that have been authorised by the Commission pursuant to Article 129(2)(a), the provisions of paragraphs 1 and 2 shall apply from that date.

 

4、Compliance with the emission limit specified in the first subparagraph of paragraph 1 shall be demonstrated in accordance with Technical Specification CEN/TS 16516, adapted as follows:

a) the duration of the test shall be at least 14 days instead of 28 days;

b) the ammonia gas emission shall be measured at least once per day throughout the test;

c) the emission limit shall not be reached or exceeded in any measurement taken during the test;

d) the relative humidity shall be 90 % instead of 50 %;

e) an appropriate method to measure the ammonia gas emission shall be used;

f) the loading rate, expressed in thickness and density, shall be recorded during the sampling of the cellulose insulation mixtures or articles to be tested.

  

 

 

 


路过

雷人

握手

鲜花

鸡蛋

最新评论

热门阅读
说:看中医需要缘份,哪EMC是不是也要缘分
各位兄弟姐妹,今天是2023年最后一天,小假期第二天。 许多年轻人都在准备着跨年,我们老年人怎 ......
发布:2023-12-31     阅读:237      点评:0
EMC Design Guidelines
These Electromagnetic Compatibility (EMC) design guidelines are here to help you understan ......
发布:2023-11-22     阅读:274      点评:5
EN 55014-1:2017/A11:2020
This document (EN 55014-1:2017/A11:2020) has been prepared by CLC/TC 210 "Electromagnetic ......
发布:2020-04-16     阅读:581      点评:1

QQ|小黑屋|电磁兼容网 电磁兼容小小家 EMC工程师家园 电磁兼容(EMC)小小家学习园地

GMT+8, 2024-3-29 08:08 , Processed in 0.084991 second(s), 24 queries .

返回顶部